Ronstar : SallyPort Series Cylindrical security door

SECURITY INTERLOCKING DOOR

SallyPort Series

．alternative 。optional
Subject to technical modification

Principle
Finish
Construction
Function
Door Operate Sequence

Principle

Electronically monitored access control door for maximum security requirements, with automatic circular sliding doors, hence convenient and quick while taking up a minimum of space.

▲TOP

Finish

．	aluminum, anodized
．	powder-coated RAL colours
．	stainless steel
	．satin finish ．glossy

Further models on request,
customized design by agreement.

▲TOP

Construction

Body
metal clad

Circular sliding leaf

．	frame with glass paneling
．	metal clad
	。with vision panel
。	shatter-resistant
。	burglar-resistant
。	bullet-resistant

▲TOP

Function

Doors open and close automatically, in a program-controlled manner. The door operating sequence inwards or outwards is remote-con-trolled by an access control system or initiated manually. Attempts at forced entry meet with a passive response (high resistance value). Upon completion of such an attempt, the interrupted door operating sequence is continued or the staring position is directly assumed once more. The interior is monitored by sensors.

In the event of power failure

．	both door leaves open
．	inner leaf open
．	outer leaf open
．	both door leaves closed (with manual interlock deactivation, see below)
Automatic setting into starting position after power has been restored.
。	Escape and rescue route equipment (Use in escape and rescue routes must be individually cleared with the relevant building inspection authorities.)
。	energy store for reliable single opening of door leaves which are closed in de-energized state
。	connection to emergency control switch
。	connection to key-operated switch outside
。	manual unlocking of either inner or outer door wing from inside the unit

▲TOP

Door Operating Sequence

	The door is closed and interlocked. (Staring position)
	The door is opened for an authorized person who then enters the interior of the unit.
	The door closes automatically. Additional identification and measuring systems may be installed in the interior of the unit.
	Then, either the second door opens or the person is directed back through the first door.
	After the unit has been vacated, the door which was opened last is closed again automatically. (Starting position)
▲TOP